Skip to main content

Indie game storeFree gamesFun gamesHorror games
Game developmentAssetsComics
SalesBundles
Jobs
TagsGame Engines

"Voices Of The Void" Alpha

Gather unknown signals from deep, silent space · By mrdrnose

Voices of the Void 0.8.2 Bug Reports Locked

A topic by mrdrnose created Jan 20, 2025 Views: 130,345 Replies: 823
This topic was locked by mrdrnose Mar 31, 2026
Viewing posts 41 to 60 of 460 · Next page · Previous page · First page · Last page

My itch.io app says the version is up to date but when I open the game it's still on version 0.8.1 

it opened to the 0.8.2 version once i think but it won't do it again.

(+2)

Don't use the app. This game is not intended to be used with the app.

(+4)

Kerfur and Kerfur-O both get stick in the river and are made mostly useless due to this. Really annoying after doing the new recipe for Kerfur-O.

(1 edit) (+1)

Turn on snow mode, the ice seems to have messed up pathfinding for the river when snow mode is off.

(1 edit)

Radial action menu doesn't work with the new workstation.

Kel jumpscares staring if you look up while crouching or when climbing a ladder.

Discbox swaps model to the old one when sending a drone.

Rain goes through the base roof (but doesn't go through the roof of the forest cabin, so its collision box can be copipasted to the base).

The kitchen knife can't lay still on the table, but it can on the floor.

(+1)

Bug.

The visible playermodel is effectively a placeholder right now until we get proper animations and a fixed one.

The current drive box model is temporary until the next update gives it a real model, this is probably just a small oversight that doesn't really matter.

"Unfixable at this time".

Not sure what you mean by that.

>Not sure what you mean by that.

Knife is jumping while on table with clanking sound. I think it's blade collision box need to be scaled or smthn.

Yeah now I understand, smaller but complex(?) object collisions seems to behave erratically sometimes, especially when on another prop.

(+2)

Holy shit I'm not the only person in the game to use the radial action menu?!

Странный баг: во время события закончилась стамина, упал на пол, и камера вышвырнула меня за спину игровой модели. 

Что обычный Керфур что Керфур-О при пробегании определённых маршрутов бегут вместо моста в сторону воды и в итоге застревают там. Вчера не смог выполнить хеш коды потому что Керфур-О застрял.

При ручном управлении его программа сбивается и он начинает бегать по сателайтам снова.

Включи зиму. По всей видимости, сейчас маршруты керфуров сбиты из-за этого режима и они думают, что река замёрзшая даже летом.

We are loving this game! We just had our first bad sun event, and when we walked outside it forced us to look at it but nothing else would happen. We would have to look straight down or our camera would be dragged to stare at the sun. I'm not sure if that is a normal event or if damage was supposed to occur and didn't, I just wanted to let it be known! We are using the latest version that was uploaded 11 days ago

Bad Sun is a bit buggy, sometimes it just stops damaging you or has other weird unintentional effects.

"Oven repair" is a global achievement; if you repair the oven in one save, you won't get the reward if you repair it in another save.
This seems unintentional, considering both "Clean toilet" and "Clean sink" are per-save advancements.

how do you even fix the oven i have tried for so long and can't get it to work

You need a screwdriver and a wrench, which you can find on the workbench in the garage.

  1. Hold your screwdriver and interact with the oven.
  2. Click on all the screws to unscrew them and remove the cover.
  3. Back out and put the screwdriver away; you need to do the next step empty-handed.
  4. Interact with the oven again and rewire it.
    1. Click on a red output pin to select it.
    2. Click on a blue input pin to connect it to the currently selected output pin.
    3. If you hear a sparking sound, try again - that's not the correct output pin.
    4. Do this for every pair of pins.
  5. Once all the pins are connected, back out again.
  6. Hold your wrench and interact with the oven again.
  7. Click on every input pin.

OOOOOHHHHH THANK YOU i always have my sound on low so i never heard any clicking thank you so much

I've bought Kerfur, only for it to dash somewhere never to be seen again. After remembering about him, I checked his camera - he was stuck somewhere underwater. I couldn't get him out using camera controls of the what I assumed to be river, as he couldn't climb up underwater ground. I tried searching for him, but never found him. I noticed on the radar that there was something in the river on the edge of the map, but still couldn't find him. After I returned, I noticed that the blimp on the radar is no longer there.

Brand new Kerfur proceeded to drown himself, with his body never found :(

Another bug, is when I had a "work" nightmare (with table, boxes, cans, etc) when I stood against a moving wall, it threw me out of the map. Then I instantly died when the nightmare was over.

i am not entirely sure if that might be a bug but i notices the rep.debug command not working anymore and the solar mode being broken apparently (started new file and the sun was normal and not a bad sun)

(1 edit)

It is "debug rep" now, to match the other debug commands.
The sun is normal for the first day, seems to be one of the Many solar mode bugs.

"Virus" signal has no effects on the 0.8.2 consoles. The effects of downloading it still properly happen, but none of the screens display the ASCII skull or emit the sounds.

Deleted 1 year ago
(+1)

This can happen due to an old bug when this exact slot can't decide whether it has a drive in it or not (you might have noticed how you can't save a signal on an inserted drive after processing). Also, drives with a copy of a signals have these yellow lights (you can make a copy by saving a signal on a computer). Not sure why this happens, but it's harmless

Anything new about the broken target command?

What broken target command?

In 8.2 sv.target command doesn’t work properly, no matter what you try to target it leads to a spot near the base entry (probably 0;0 coordinates) and it won’t reset

Update your game, you aren't actually on the latest version.

if you mean the "sv.target" command then it's fixed in newest version. 

oh thanks missed it

(2 edits)

You can actually use the radar to ping things now. If you interact with it you can use WASD to move the cursor and then press enter on a location or entity and it will set the compass to target it.

I seem to have a very strange bug or two. I think it happens when I unpack a new version of the game, #1, when I play a new update, I launch it from the folder I unpacked it from, play a few days in-game (for this one save, it's day 5) I then save, quit the game to go to bed or something, next day and onwards, it opens from the itch.io client, the save is gone and I start the new update from day 1 again, from there it does save properly, and currently it is day 15, it seems I have 2 versions of the same build, if one is launched from Itch.io, it seems to be the one where I have progressed the most (which has two 0.8.1 build saves in there too which don't seem to have a date for when it was created, saying 0001.01.01-00.00) , if I launch it via the folder it is in (For me, it is C:\Users\(MyUsername)\AppData\Roaming\itch\apps\votv\pa0082_0012\pa0082_0012\WindowsNoEditor that is where the .exe is for the game) it will have the previous save that I first created (and there seems to be a 0.8.1 build save in there as well as a 0.7.0 build too, both are also dated 0001.01.01-00.00),  I figured this out today while trying to run the game as an admin, doing so opens the game without my most recent save (the Day 5 save), while opening it via itch.io (anytime after I reopen the game a 2nd time after a new update and then) will bring me to my most recent save and doesn't seem to have an option to run as admin, I figured this all out solely to try and get some textures to work for custom rugs, pictures, posters and videos for the TV. I don't want to delete and uninstall everything just to try and get an absolutely clean reinstall, as I seem to have lost my day 45 save somehow,  (either that or it's on the outdated 0.8.1 build of the game) so.... if anyone can understand whatever is happening with me right now, I'll gladly accept some help, if I have to stick with it as it is and not be able to use or view the custom stuff, that's ok, but I was looking forward to try and get some custom stuff working. Any help is appreciated, if I can find where the most recent version of the game (the one where my saves are still there, as both seem, to say "Pre-Alpha 0.8.2") and move them to the same place to where they need to be to work properly, run as admin correctly and show all my save files in one place, then I will be pretty happy.

(+2)

I haven't used this app, but many people talk about its poor performance, so they advise not to launch games through the app, but to launch them directly from the folder

Oh, ok, Is there a way to move saves around though?  If this works then I may do this to avoid losing my progress

(1 edit)

If it's any help, I found the folder with the older (original) saves with little progress, so I just need to find the folder with the newer saves in them (and possibly the version of the game that opens with them) and see if I can move things around (probably into the original folder) to get them all to show up and work, as opening the .exe file directly seems to only load the older and less progressed save files, opening it through the client app gives me the more recent and more progressed saves.

Edit: running the game as an administrator also only gives me the version with the older saves, less progressed saves, it's like there's a secret folder with the higher progressed saves somewhere on the computer that I cannot find, another thing I have noticed is that sandbox is greyed out and that Solar isn't an option on there, despite it being 0.8.2 also, it keeps saying the file directory is in the same place but I cannot see how that is possible when opening it in two different ways gives two different possibilities on the menu while it remains as the same 0.8.2 build.... it is insanely confusing to me.

Check this way: C:\Users\UserName\AppData\Local\VotV\Saved\SaveGames

I can't say where the application saves.

(+2)

funny thing: you can't burry the shovel, but rake can be buried

hi there! for some reason, after a signal is downloaded, i am unable to save it and send it to the next screen and listen to it. it simply does not display in the list! am i doing it wrong or is something broken?

(1 edit) (+1)

Is the save button lit up green? If not then the signal isn't done downloading. The signal needs to be fully downloaded and detected. The download percent is below your energy consumption and the detected percent is in the video/picture of the object you scanned. If you have updated one more than the other they can finish at different times. I do also recall a glitch i've had where my downloading console stopped working and i had to reload.

(+1)

When kerfer has to go across the river, instead of going down the bridge normally, she tries to go across on the outer edge of the bridge so she falls in the river and gets stuck

(3 edits)

softlock bug: Rozital Scouts on day 33 do not leave, it passed more than in-game day and they are still there, iam unable to sleep or do anything basically because of them, tried to reload the save 5 times, they bug every time, they just stand around base and dont go anywhere else

possible solution: to activate winter mode, then the one who gets trapped in water do leave, btw that one rozital also is trapped in same placed where kerfus and kerfus-0 is stuck underwater

(1 edit)

Ice getting proper pathfinding seems to have unintentionally broken the river pathfinding in the process.

Hello! when running the game in my monitors native 1440p res certain light sources most notably the over head ceiling lights in the main room of the base flicker. 

The only solution i was able to find was running the game at 1080p res. Has anyone encountered this? is there as setting i can change to stop this other than resetting the res to 1080.

I want to run it at 1440p so i have an easier time alt tabbing between programs while using thew game. Also the issue doesn't seem to show up when recording on OBS if that helps diagnose the issue.

What do you mean they flicker? If you mean they just go dark for a split second occasionally, that is intentional.

No its not intentional I'm pretty sure. It also happens outside too. Below is a link where i ride the ATV all the while the light flickers, however as said b4 OBS doesn't capture it at the end is camera footage of it happening to prove I'm not crazy

No idea what it could be then, haven't seen this before.

LOL I just figured it out. If anyone has a similar issue make sure HDR is enabled in your display settings and in game. This fixed the issue for me.

Viewing posts 41 to 60 of 460 · Next page · Previous page · First page · Last page