Skip to main content

Indie game storeFree gamesFun gamesHorror games
Game developmentAssetsComics
SalesBundles
Jobs
TagsGame Engines

馃搶 Known issue: random errors on some Genesis consoles with Mega EverDrive PRO Sticky

A topic by slash_bytes created 18 days ago Views: 100 Replies: 1
Viewing posts 1 to 2
Developer

A tester reported that some Sega Genesis consoles (reported on certain Model 1 VA7 and Model 2 VA0 revisions) can show errors or crashes when running homebrew from a Mega EverDrive PRO. This is a hardware issue, not a bug in the game, and it cannot be fully fixed in software.

WHAT IS HAPPENING

According to the report, on these revisions the data bus picks up electrical noise when nothing is connected to the expansion port, and that noise can interfere with the flash cart. It does not affect every console of these models, since some revisions were corrected at the factory.

WHAT YOU CAN TRY

- Connect something to the expansion port to terminate the bus, such as a 32X adapter or a Sega CD (unpowered).

- Update your flash cart to the latest firmware.

- Test the game on another console or in an emulator to confirm whether the problem follows the console.

If you are not sure about modifying your console, please do not attempt hardware mods. Soldering resistors onto the data bus requires experience, schematics and care, and a mistake can damage your console.

STILL HAVING PROBLEMS?

Please open a separate topic with the "Bug" tag and include your console model and revision, flash cart and firmware version, and the game version. If the same issue happens with other homebrew or commercial ROMs on that console, it is almost certainly the hardware.

Source for the original discussion: Krikzz forums (search "MEDPRO data bus noise").

So, the photo below is the bus terminator Sega themselves released with the very first 32x consoles to deal with this defect. Later 32x consoles DID NOT include this terminator. This terminator resolves the problem regardless of the presence of an actual 32x.