Skip to main content

Indie game storeFree gamesFun gamesHorror games
Game developmentAssetsComics
SalesBundles
Jobs
TagsGame Engines

After replying to you, I saw that you had uploaded an update. I downloaded it and noticed that the organization of the ROMs has improved, though there is still some padding. The final 'V' and 'C' ROMs have some extra code at the end—would it be possible to clean them up further? The less physical space the EPROMs take up on the PCBs, the greater the compatibility will be. I’m wondering about the data at the end of each ROM: is it actually necessary for the cartridge to function, or is it just there because the EPROMs themselves are physically present? Every step I take requires careful thought to save time and avoid issues when swapping EPROMs—it’s not easy! :)


Despues de contestarte vi que habias subido una actualizacion,la descargue y veo que mejoro el orden de las ROMS,igual sigue habiendo relleno,las ultimas V y C roms tienen un codigo al final,sera posible limpiarlas mas?Cuanto menos espacios fisicos ocupen en las pcbs en catidad de Eproms mas compatibilidad habra.Estoy en duda por los datos que estan al final de cada rom si es necesaria para hacer funcionar el cartucho o que esten fisicamente las eprom para ejecutar.Cada paso que doy tengo que pensarlo varias veces para ahorrar tiempo y problemas en el cambio de eproms,no es facil!! :)

Thanks for looking so closely, and for the screenshot. That’s the file 222-c8.c8 from the FBNeo set (samsho4.zip), not from the real cartridge layout.

  • The 4 bytes at the end (5A ED 74 53) are almost certainly a checksum filler. FBNeo only runs a set it already knows by name and CRC, so the zip is disguised as Samurai Shodown IV. The padding and the last few bytes are there so the files match the sizes and CRCs FBNeo expects.
  • They do nothing on real hardware. The 68000 and the Neo Geo graphics chip never read them. They aren’t game code or data, and you don’t need to burn them.
  • The zeros are the same story. They only fill the file out to the size FBNeo expects, and the cartridge never reads them.

For EPROMs, please don’t use the FBNeo zip. The real contents are in the .neo build:

  • C ROM: two 4 MB lanes, C1 and C2, completely full with no padding.
  • V ROM: 16 MB. Unused space at its end can be left unpopulated.
  • P ROM: 1 MB.

Not yet confirmed: the exact used size of each ROM, and how much of the V ROM’s end can be dropped. I’ll check these and post a list of the minimum chip size per ROM, so you only buy and burn what is needed.

Español

Gracias por mirarlo con tanto detalle y por la captura. Ese es el archivo 222-c8.c8 del set de FBNeo (samsho4.zip), no el de un cartucho real.

  • Los 4 bytes del final (5A ED 74 53) son casi seguro relleno para el checksum. FBNeo solo ejecuta sets que ya conoce por nombre y CRC, así que el zip se disfraza de Samurai Shodown IV. El relleno y esos últimos bytes están para que los archivos coincidan con los tamaños y CRC que FBNeo espera.
  • En hardware real no hacen nada. Ni el 68000 ni el chip gráfico de Neo Geo los leen. No son código ni datos del juego y no hace falta grabarlos.
  • Los ceros son lo mismo. Solo rellenan el archivo hasta el tamaño que pide FBNeo y el cartucho nunca los lee.

Para las EPROM no uses el zip de FBNeo. El contenido real está en el build .neo:

  • C ROM: dos carriles de 4 MB, C1 y C2, completamente llenos y sin relleno.
  • V ROM: 16 MB. El espacio sin usar al final se puede dejar sin poblar.
  • P ROM: 1 MB.

Sin confirmar todavía: el tamaño usado exacto de cada ROM y cuánto del final de la V se puede quitar. Lo reviso y publico una lista con el chip mínimo para cada ROM, así solo compras y grabas lo necesario.