Summary: Sega Genesis Model 2 VA0 & Sega Genesis Model 1 VA7 often have problems with the MEDPRO if the expansion bus is not terminated. This can cause problems with homebrew games.
- Game version: All revisions. Cannot be resolved through software completely.
- Platform: Sega Genesis Model 2 VA0 (& Brazilian equivalent), Sega Genesis Model 1 VA7 "Stinker" model. It does not ALWAYS effect even these sub-models because some had hardware fixes at the factory. Be aware that there were actually over a half dozen sub-models of the Model 1, over a half dozen sub-models of the Model 2, and two sub-models of the Model 3. Less than 1/14th of all Genesis consoles have this problem.
- What happened vs. what you expected: While the latest Krikzz firware v26.0925 reduced this problem, it is still an issue with homebrew. The data bus implementation of these particular models introduces noise that interferes with the operation of the MEDPRO.
- Steps to reproduce: Don't try to reproduce it. Terminate the bus on these consoles. The 32X dongle (NOT the 32x itself, but the bus terminator that the earliest ones came with) or a completely inert Sega CD can safely resolve this problem. If you have one of the effected models that starts throwing errors, it could damage the FPGA in the MEDPRO if you keep reproducing the issue. It is an electrical noise problem. There are also DIY guides to creating a terminator on the internet.
- How often it happens (always / sometimes / once): If you have an effected Sega Genesis model that was never factory corrected, it is guaranteed to happen.
- Screenshot or video if possible: This is a known issue that was discussed at length in the Krikzz forums. It is an obscure problem because the sub-models that have this issue also have sub par sound quality and so usually people that have MEDPRO would not even own them.
Supposedly, to clean up the noise you would run a 4.7k Ohm resistor from each of the 16 system data bus lines to the ground pin. A DIY should not be attempted without extensive knowledge, detailed schematics, and high technical skill.
Here is what the 32x Dongle (NOT THE 32X) looks like. It is ALSO required to run the 32X on the same consoles with this defect. 

