Hi! Thanks for asking, and for owning real MVS hardware, that's exactly the audience this is for.
Short answer: it's designed as an MVS cartridge, but I have NOT tested it on real hardware yet, so I can't promise it works on a real board.
What I can tell you about the ROM layout:
- Program (P1): 1 MB, no bank switching
- Fix layer (S1): 128 KB
- Z80 sound program (M1): 128 KB
- ADPCM samples (V): about 9 MB used
- Graphics (C1/C2): 4 MB each (8 MB total), exactly full
So it's a normal-sized cart and doesn't need anything exotic. It runs entirely on the 68000 and the stock Neo Geo graphics chips. Nothing depends on an emulator.
What you would need is a way to put those ROMs on a cart: a flash/multi-game MVS cart or a custom board. I haven't built one, so I can't tell you which will work.
The game also has the standard soft DIP menu in the MVS Test menu, so it behaves like a real MVS game.
Right now the download is the .neo file (for Geolith / MiSTer / NeoSD) and an FBNeo set. A separate ROM set for real cartridges is something I want to do, but it isn't ready or tested. If you try it on your hardware and tell me what happens, that would help a lot.
----
Hola! Gracias por preguntar, y por tener consolas MVS originales: es justo para quien está pensado.
Respuesta corta: está diseñado como cartucho MVS, pero TODAVÍA NO lo he probado en hardware real, así que no puedo asegurar que funcione en una placa real.
El diseño de las ROMs:
- Programa (P1): 1 MB, sin cambio de bancos
- Capa fija (S1): 128 KB
- Programa de sonido Z80 (M1): 128 KB
- Muestras ADPCM (V): unos 9 MB usados
- Gráficos (C1/C2): 4 MB cada uno (8 MB en total), completamente lleno
Es un cartucho de tamaño normal. Funciona solo con el 68000 y los chips gráficos estándar de la Neo Geo; no depende de ningún emulador.
Lo que necesitarías es una forma de grabar esas ROMs en un cartucho: un cartucho flash/multijuego para MVS o una placa propia. Yo no he fabricado ninguno, así que no sé decirte cuál funcionaría.
El juego también tiene el menú estándar de DIP por software en el menú Test de la MVS, como cualquier juego MVS.
Ahora mismo la descarga es el archivo .neo (para Geolith / MiSTer / NeoSD) y un set para FBNeo. Un set de ROMs para cartuchos reales es algo que quiero hacer, pero no está listo ni probado. Si lo pruebas en tu hardware y me cuentas qué pasa, me ayudaría muchísimo.
Hello, thanks for the quick response. I’ve tried transferring this to a cartridge, using my basic knowledge of these types of conversions. I’ve run into a problem: the ROM sizes exceed what actual cartridges can accommodate. I don’t have many cartridges to test with, and the ones I do have don’t have an EPROM capacity large enough to hold the data. If they could be trimmed down, I think it would be much easier. There’s a lot of filler data, which I believe is complicating the process. The ROMs are just too large. I don’t have a flash cartridge—only individual original cartridges.Greetings from Argentina!