Skip to main content

Indie game storeFree gamesFun gamesHorror games
Game developmentAssetsComics
SalesBundles
Jobs
TagsGame Engines
(1 edit)

Hello, thanks for the quick response. I’ve tried transferring this to a cartridge, using my basic knowledge of these types of conversions. I’ve run into a problem: the ROM sizes exceed what actual cartridges can accommodate. I don’t have many cartridges to test with, and the ones I do have don’t have an EPROM capacity large enough to hold the data. If they could be trimmed down, I think it would be much easier. There’s a lot of filler data, which I believe is complicating the process. The ROMs are just too large. I don’t have a flash cartridge—only individual original cartridges.Greetings from Argentina!


Hola,gracias por la pronta respuesta.He intentado pasarlo a cartucho,con mis basicos conocimientos en este tipo de conversiones.Me he encontrado con un problema,los tamaños de las ROM superan las admisibles en los cartuchos reales.No tengo muchos cartuchos para hacer la prueba,pero los que tengo no tiene el tamaño eprom para grabar el contenido.Si se pudieran acortar creo seria mas facil.Hay mucha info de relleno y creo eso me dificulta el proceso.Son muy grandes las ROMS.No tengo cartucho flash,solo original individual.Saludos de Argentina!

Hi, and greetings back to Argentina! You’re right, and thank you for trying it on real hardware.

The files in the current release are padded. The sound sample ROM (V) is stored as 16 MB, but only about 9 MB of it holds real data. The rest is filler. The graphics ROMs (C) are about 8 MB and completely full, so they can’t be trimmed that way. The program ROM (P) is 1 MB, and the S and M ROMs are 128 KB each.

Removing the filler is on my list. I haven’t done it yet, so I can’t give you exact sizes or a date. Even after the filler is gone, the sample data is a bit over 8 MB, so it still won’t fit a small cartridge without more work. I’ll post the new sizes in a devlog when I have them. Since you only have original cartridges and no flash cart, tell me which EPROM or mask ROM sizes your boards take and I’ll aim for those.

¡Hola, y saludos a Argentina! Tienes razón, y gracias por probarlo en hardware real.

Los archivos de la versión actual tienen relleno. La ROM de samples de sonido (V) está guardada como 16 MB, pero solo unos 9 MB tienen datos reales. El resto es relleno. Las ROMs de gráficos (C) son de unos 8 MB y están completamente llenas, así que no se pueden reducir así. La ROM de programa (P) es de 1 MB, y las ROMs S y M son de 128 KB cada una.

Quitar el relleno está en mi lista de pendientes. Todavía no lo he hecho, así que no puedo darte tamaños exactos ni una fecha. Aun sin el relleno, los samples ocupan algo más de 8 MB, así que todavía no cabría en un cartucho pequeño sin trabajo extra. Publicaré los nuevos tamaños en un devlog cuando los tenga. Como solo tienes cartuchos originales y no flash, dime qué tamaños de EPROM o de ROM de máscara aceptan tus placas y apuntaré a esos.

Good day. Based on my limited knowledge and what I’ve observed and tested, it seems that for the V-ROMs, you shouldn't exceed 8MB total—distributed across four 27C160 (2MB) EPROMs—at least when using an 8-bit PCB (due to the audio IC). The C-ROMs are fine in terms of size; in my case, the issue lies with the V-ROMs, as I’m using 27C322 (16-bit, 4MB) chips, which are not compatible with the PCM audio IC. It’s possible I’m mistaken and there is a way to use 27C322s for the V-ROMs, but I’m not aware of it. If you look at the ROMs for *Shinobi* or *Golden Axe*, you can use those sizes as a reference, as they work on most MVS PCBs. I’m still in the process of testing the PCB. Thanks!


Buen dia,por el poco conocimiento que tengo en esto,lo que vi y probe, seria no pasar en las ROMs V los 8mb en 4 eproms 27c160 (2mb) al menos en pcb de 8bits (por el IC de audio).Las C Roms estan bien en tamaño,en mi caso el problema esta en V rom por el hecho que las ROMS son 27c322 (16bit - 4MB) y no son compatibles con el IC de audio PCM.Cuidado,por ahi estoy confundido y existe alguna manera de poder usar 27c322 en V,pero la desconozco.Si miras las Roms de Shinobi o Golden Axe,en esos tamaños funcionan en la mayoria de PCBs MVS,puedes usar de referencia.Todavia estoy en pruebas de pcb.Gracias!

After replying to you, I saw that you had uploaded an update. I downloaded it and noticed that the organization of the ROMs has improved, though there is still some padding. The final 'V' and 'C' ROMs have some extra code at the end—would it be possible to clean them up further? The less physical space the EPROMs take up on the PCBs, the greater the compatibility will be. I’m wondering about the data at the end of each ROM: is it actually necessary for the cartridge to function, or is it just there because the EPROMs themselves are physically present? Every step I take requires careful thought to save time and avoid issues when swapping EPROMs—it’s not easy! :)


Despues de contestarte vi que habias subido una actualizacion,la descargue y veo que mejoro el orden de las ROMS,igual sigue habiendo relleno,las ultimas V y C roms tienen un codigo al final,sera posible limpiarlas mas?Cuanto menos espacios fisicos ocupen en las pcbs en catidad de Eproms mas compatibilidad habra.Estoy en duda por los datos que estan al final de cada rom si es necesaria para hacer funcionar el cartucho o que esten fisicamente las eprom para ejecutar.Cada paso que doy tengo que pensarlo varias veces para ahorrar tiempo y problemas en el cambio de eproms,no es facil!! :)

Thanks for looking so closely, and for the screenshot. That’s the file 222-c8.c8 from the FBNeo set (samsho4.zip), not from the real cartridge layout.

  • The 4 bytes at the end (5A ED 74 53) are almost certainly a checksum filler. FBNeo only runs a set it already knows by name and CRC, so the zip is disguised as Samurai Shodown IV. The padding and the last few bytes are there so the files match the sizes and CRCs FBNeo expects.
  • They do nothing on real hardware. The 68000 and the Neo Geo graphics chip never read them. They aren’t game code or data, and you don’t need to burn them.
  • The zeros are the same story. They only fill the file out to the size FBNeo expects, and the cartridge never reads them.

For EPROMs, please don’t use the FBNeo zip. The real contents are in the .neo build:

  • C ROM: two 4 MB lanes, C1 and C2, completely full with no padding.
  • V ROM: 16 MB. Unused space at its end can be left unpopulated.
  • P ROM: 1 MB.

Not yet confirmed: the exact used size of each ROM, and how much of the V ROM’s end can be dropped. I’ll check these and post a list of the minimum chip size per ROM, so you only buy and burn what is needed.

Español

Gracias por mirarlo con tanto detalle y por la captura. Ese es el archivo 222-c8.c8 del set de FBNeo (samsho4.zip), no el de un cartucho real.

  • Los 4 bytes del final (5A ED 74 53) son casi seguro relleno para el checksum. FBNeo solo ejecuta sets que ya conoce por nombre y CRC, así que el zip se disfraza de Samurai Shodown IV. El relleno y esos últimos bytes están para que los archivos coincidan con los tamaños y CRC que FBNeo espera.
  • En hardware real no hacen nada. Ni el 68000 ni el chip gráfico de Neo Geo los leen. No son código ni datos del juego y no hace falta grabarlos.
  • Los ceros son lo mismo. Solo rellenan el archivo hasta el tamaño que pide FBNeo y el cartucho nunca los lee.

Para las EPROM no uses el zip de FBNeo. El contenido real está en el build .neo:

  • C ROM: dos carriles de 4 MB, C1 y C2, completamente llenos y sin relleno.
  • V ROM: 16 MB. El espacio sin usar al final se puede dejar sin poblar.
  • P ROM: 1 MB.

Sin confirmar todavía: el tamaño usado exacto de cada ROM y cuánto del final de la V se puede quitar. Lo reviso y publico una lista con el chip mínimo para cada ROM, así solo compras y grabas lo necesario.